Construction Chemical

Let's help you!

 

Call us:
+880-2-48110667
+8801314559566
E-mail: [email protected]

or fill out our contact form

QMAX-EC
H Beam Extraction Coating Agent

Overview

The H beam extraction coating agent is the one used to extract and collect the H beam which has been used in the case of constructing continuous wall method such as the sheeting temporary facility retaining wall CIP method (Cast In Concrete Pile), SCW method (soil cement method), or cast-in-place concrete pile method etc.

Application

  • H beam extraction coating agent
  • Collected H beam anti-rust agent

Application Method

When using as newel post extraction coating agent

  • Removal of foreign material: Remove foreign material stuck to the H beam.
  • Erection of H beam: Erect H beam with support.
  • Dissolution: Dissolve the lower section of packaged container with direct flame like torch etc.
  • Coating: Perform the coating of the completely dissolved liquid phase product to the H beam with sprayer or roller etc.

When using as collected H beam anti-rust agent

  • Remove foreign materials such as concrete or soil from the H beam.
  • Dissolution: Dissolve the lower section of packaged container with direct flame like torch etc.
  • Coating: Perform the coating of the completely dissolved liquid phase product to the H beam with sprayer or roller etc.

Characteristics

  1. The application is simple, separate adhesive is not required.
  2. Numerous workers are not required.
  3. Construction cost is inexpensive.
  4. Rust generation will be suppressed as it has anti-rust effect of steel members.
  5. Saving of construction cost will be significant due to the re-use of the H beam which has been supposed to be buried.
  6. Steel members can be stored in clean state as the concrete or foreign material at the protection film section is removed easily.